Roofing Products Agriculstural Products Building Products Products Required
Contact
 
Roofing Products
Blue Diamond 3000 Slates
Blue Diamond Guarantee
Black Diamond
Black Diamond Guarantee
Wanit Certs
Fibre Cement Technical Data
Roof Pitch Vents
Roof Underlay - Rofatop
UAC V Ridge
Slate Gallery

View our Slate Gallery

Manufacturers' Plant Wanit
Blue Diamond 3000 Slates
Dungarvan Award Winning Project

 
 


Blue Diamond Slates 3000

Specifications:

  • Blue Diamond 3000 & Blue Diamond 3000 Repro slates are manufactured from a non-asbestos formulation of superior blended synthetic and cellulose fibres and Portland cement.
  • Blue Diamond 3000 & Blue Diamond 3000 Repro carry a comprehensive warranty guarantee covering both structure and colour. This guarantee is strictly in accordance with the manufacturers' original guarantee. A copy of this original guarantee is available on the website under the guarantee section.
  • Blue Diamond slates are fully compressed and finished with the highest quality acrylic coating available in the modern world today.
  • Fixing: Pre-drilled three holes.
  • Minimum Rafter Pitch = 20 degrees. Laid to 100 mm Lap.
  • Density : 1700kg/m3 average when tested to BS 4625; section 14.
  • Frost Test: 100 freeze/thaw cycles in accordance with BS EN 492; 1994.
  • Tolerances: BS EN 492; 1994. Length or Width = +-3.00mm. Thickness +1.00mm/-0.4mm
  • Fire Ratings: Fire BS 476 Part 4 fibre cement slates are non-combustible.

 

   

Plain Slates
Thickness: 4,0mm (+25% -10%)
Length: +-3mm
Width: According to EN 492 draft, 10/92
Density >=1,70 g/cm3
Moisture Content When Stored 6-12%
Bending Moment: >=35Nm/m according to EN 492 (Class A)
Dilatation: Dry › Saturated abt
4,5mm/m
Air Dried ›Saturated abt
1,0 mm/m
Frost Resistance: According to EN 492 draft, 10/92

Repro Slates
Thickness: 4,5mm (+25% -10%)
Length: +-3mm
Width: According to EN 492 draft, 10/92
Density >=1,60 g/cm3
Moisture Content When Stored 6-12%
Bending Moment: >=35Nm/m according to EN 492 (Class A)
Dilatation: Dry › Saturated abt 4,5mm/m
Air Dried › Saturated abt 1,0 mm/m
Frost Resistance: According to EN 492 draft, 10/92


 

 

Copyright © 2008 JD Roberts Agencies Ltd., All rights reserved.